10

Pretty self explanatory 

Aneal  the metal 

Smash the metal over a log with a dish cut into it.

Beat on the metal until it does what you ask it to do.

Wheel out the dents

Hammer and wheel until it fits the buck proper. After proper fit trim down the extra metal. 

Test fit panel on the bike to see if you won. 

9

Here you see the rough template for the fairing. 

After adapting the template to a piece of plywood I made ribs indicating the contours i would like to gain.

Smash, pound, jam, shrink, stretch, wheel, planish, bend, beat the metal until it lays over the buck.

8

I started building the exhaust using a box of 1.5 in tubing. I am not convinced that these bike need 1.75 in tubing when running muffler less. Could be wrong but i am gonna give it a shot. 

Here are some tips i put together.

Mounted up to the motor.

7

I am putting together a panhead as well right now and needed to spray the frame. It made more sense  to do two at once so I rushed to get all the rest of the tabs on the BF4 frame. 

Dave let me take up some space in his paint booth for the night. I haven't sprayed in a booth for a while i had forgotten how great it is. 

Here it is mounted in the frame. i usually build everything on the bike and then blow it apart and give it the respective coatings. This time since its all coming out of my pocket i am breaking it up a bit and doing it as i go. hopefully i won't regret it. 

4

Danny hooked me up with this 80's roadster tank to cut up. I like the look of this tank but it has way too much meat in the middle so i am going to narrow and pinch it. This tank seems like it could use some extra style as well so i am going to actually run it as split tanks to pay homage to the split tanks that have come on Harley Big Twins for decades. 

After drawing the centerline (hardest part of the job) run the tank down the band saw.

Remove the filler cap stamping, since the tank is shrinking you can give your self some extra material on the stamping so that you can hammer and dolly the joint after welding the stamping back in.

Here the tank is split down the middle sans cap stamping.

Took out 2in up front and 3.5 in the rear. Some people prefer to cut the tank in half in two cuts so that when you are done cutting the narrowing and pinching are already done. I generally tend to cut it down the middle and then hold the tank halves together at different angles so that I can see what my eye likes best.

Wire wheel the paint off, burn off the lead, hammer out all dents, trim a bunch of times until they fit together nicely..... then weld stuff.

3

 I sold my DRZ a while back so i had a little extra cash, i knew i wanted something reliable and powerful for this bike so i ended up snagging this rebuilt 92 dyna motor.

 Here is the Evo shoe horned into the shovel frame. After read a bunch about doing this online i was assured it would fit with very little modifications....... not true at all. i had to do quite a bit of cutting, heating, bending, smashing to squeeze this motor in the frame. but its in now and bolted down.

Whipped up this little fender support bracket for the iron head fender that  riding on back.